Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Ceilcote 242 Flakeline Vinyl ester glass-flake coating

Home | All models | Industrial coatings | Ceilcote 242 Flakeline

Ceilcote 242 Flakeline Vinyl ester glass-flake coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides glass-flake barrier protection. The data sheet gives: solids 100% · density 1.22 kg/L (10.2 lb/US gal) · DFT 375-625 µm (15-25 mil) · spreading rate 1.89 m²/L. At 25 °C it is 2 h touch dry and 4.5 h hard dry.

Industrial coatingsGlass flakeVinyl ester

Basic data

Model
Ceilcote 242 Flakeline (Vinyl ester glass-flake coating)
Product type
Vinyl ester glass-flake coating
Category
Industrial coatings
Volume solids
100%
Theoretical spreading rate
1.89 m²/L
Recommended dry film thickness
375-625 µm (15-25 mil)
Density (specific gravity)
1.22 kg/L (10.2 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 4.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Ceilcote 242 Flakeline (Vinyl ester glass-flake coating) data sheet; other conditions are not listed.
Other parameters
For Ceilcote 242 Flakeline, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.529 L/m² for Ceilcote 242 Flakeline, excluding application losses. That is about 52.9 L per 100 m². At a wet film of 375–625 µm, coverage is 1.55 m² per kg. The values above are calculated.

System and application

The substrate condition for Ceilcote 242 Flakeline has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Technical data for Ceilcote 242 Flakeline can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Ceilcote 242 Flakeline Vinyl ester glass-flake coating”; parameters not listed here are governed by that data sheet.

Enquiries on Ceilcote 242 Flakeline

  • System selection for Ceilcote 242 Flakeline: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Ceilcote 242 Flakeline: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Ceilcote 242 Flakeline: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.