Industrial coatings
Chartek 8E Epoxy intumescent fire protection
Home | All models | Industrial coatings | Chartek 8E
Chartek 8E Epoxy intumescent fire protection is supplied under the International Paint brand. It belongs to the Industrial coatings range. Its function is fire protection. Published figures are: density 1000 kg/m³(62.427 lb/ft³) · solids 100%. Drying at 20 °C: 5 h touch dry, 18 h hard dry.
Basic data
- Model
- Chartek 8E (Epoxy intumescent fire protection)
- Product type
- Epoxy intumescent fire protection
- Category
- Industrial coatings
- Volume solids
- 100%
- Density (specific gravity)
- 1000 kg/m³(62.427 lb/ft³) dual-pump spray application(ISO 1…
- Drying (20°C substrate temperature)
- Touch dry 5 h / Hard dry 18 h
- Drying conditions
- Values are taken from the 20 °C substrate-temperature row of the drying table in the Chartek 8E (Epoxy intumescent fire protection) data sheet; other conditions are not listed.
- Other parameters
- For Chartek 8E, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
The TDS gives no spreading rate for Chartek 8E; consumption is taken from it.
System and application
For Chartek 8E, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Chartek 8E is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Chartek 8E Epoxy intumescent fire protection”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Chartek 8E
- System selection for Chartek 8E: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Chartek 8E: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Chartek 8E: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

