Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Enviroline 225 Two-component polyamine-cured lining system

Home | All models | Industrial coatings | Enviroline 225

Enviroline 225 Two-component polyamine-cured lining system is an epoxy coating, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 100%, density 1.21 kg/L (10.1 lb/US gal), DFT 1000-1500 µm (40-60 mil), spreading rate 0.80 m²/L. At 25 °C it is 45 min touch dry and 60 min hard dry.

Basic data

Model
Enviroline 225
Product type
Two-component polyamine-cured lining system
Category
Industrial coatings
Volume solids
100%
Theoretical spreading rate
0.80 m²/L
Recommended dry film thickness
1000-1500 µm (40-60 mil)
Density (specific gravity)
1.21 kg/L (10.1 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 45 min / Hard dry 60 min
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 225 data sheet; other conditions are not listed.
Other parameters
For Enviroline 225, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 1.250 L/m² for Enviroline 225, excluding application losses. That is about 125.0 L per 100 m². At a wet film of 1000–1500 µm, coverage is 0.66 m² per kg. All figures are calculated.

System and application

The substrate condition for Enviroline 225 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Enviroline 225 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 225 Two-component polyamine-cured lining system”; parameters not listed here are governed by that data sheet.

Enquiries on Enviroline 225

  • System selection for Enviroline 225: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Enviroline 225: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Enviroline 225: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.