Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Enviroline 230 Advanced epoxy-phenolic lining system

Home | All models | Industrial coatings | Enviroline 230

Enviroline 230 Advanced epoxy-phenolic lining system is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 100% · density 1.55 kg/L (12.9 lb/US gal) · DFT 500-1250 µm (20-50 mil) · spreading rate 2 m²/L. At 25 °C it is 2.5 h touch dry and 3.5 h hard dry.

Basic data

Model
Enviroline 230
Product type
Advanced epoxy-phenolic lining system
Category
Industrial coatings
Volume solids
100%
Theoretical spreading rate
2 m²/L
Recommended dry film thickness
500-1250 µm (20-50 mil)
Density (specific gravity)
1.55 kg/L (12.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2.5 h / Hard dry 3.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 230 data sheet; other conditions are not listed.
Other parameters
For Enviroline 230, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.500 L/m² for Enviroline 230, excluding application losses. That is about 50.0 L per 100 m². At a wet film of 500–1250 µm, coverage is 1.29 m² per kg. The values above are calculated.

System and application

The substrate condition for Enviroline 230 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Technical data for Enviroline 230 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 230 Advanced epoxy-phenolic lining system”; parameters not listed here are governed by that data sheet.

Enquiries on Enviroline 230

  • System selection for Enviroline 230: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Enviroline 230: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Enviroline 230: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.