Industrial coatings
Enviroline 376F-30 Two-component polyamine-cured lining system
Home | All models | Industrial coatings | Enviroline 376F-30
Enviroline 376F-30 Two-component polyamine-cured lining system is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 1.33 m²/L, solids 100%, density 1.53 kg/L (12.8 lb/US gal), DFT 500-1000 µm (20-40 mil). Drying at 25 °C: 2 h touch dry, 4 h hard dry.
Basic data
- Model
- Enviroline 376F-30
- Product type
- Two-component polyamine-cured lining system
- Category
- Industrial coatings
- Volume solids
- 100%
- Theoretical spreading rate
- 1.33 m²/L
- Recommended dry film thickness
- 500-1000 µm (20-40 mil)
- Density (specific gravity)
- 1.53 kg/L (12.8 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 376F-30 data sheet; other conditions are not listed.
- Other parameters
- For Enviroline 376F-30, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.752 L/m² for Enviroline 376F-30, excluding application losses. That is about 75.2 L per 100 m². At a wet film of 500–1000 µm, coverage is 0.87 m² per kg. These are theoretical values.
System and application
For Enviroline 376F-30, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Enviroline 376F-30 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 376F-30 Two-component polyamine-cured lining system”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Enviroline 376F-30
- System selection for Enviroline 376F-30: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Enviroline 376F-30: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Enviroline 376F-30: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

