Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Enviroline 405HT Two-component polyamine-cured lining system

Home | All models | Industrial coatings | Enviroline 405HT

Enviroline 405HT Two-component polyamine-cured lining system is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides heat resistance. Published figures are: spreading rate 1.30 m²/L · DFT 500-1000 µm (20-40 mil) · density 1.56 kg/L (13.0 lb/US gal) · solids 98%. At 25 °C it is 2 h touch dry and 4 h hard dry.

Industrial coatingsHeat-resistantEpoxy

Basic data

Model
Enviroline 405HT
Product type
Two-component polyamine-cured lining system
Category
Industrial coatings
Volume solids
98%
Theoretical spreading rate
1.30 m²/L
Recommended dry film thickness
500-1000 µm (20-40 mil)
Density (specific gravity)
1.56 kg/L (13.0 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Enviroline 405HT data sheet; other conditions are not listed.
Other parameters
For Enviroline 405HT, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.769 L/m² for Enviroline 405HT, excluding application losses. That is about 76.9 L per 100 m². At a wet film of 510–1020 µm, coverage is 0.83 m² per kg. These are theoretical values.

System and application

The substrate condition for Enviroline 405HT has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Technical data for Enviroline 405HT can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Enviroline 405HT Two-component polyamine-cured lining system”; parameters not listed here are governed by that data sheet.

Enquiries on Enviroline 405HT

  • System selection for Enviroline 405HT: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Enviroline 405HT: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Enviroline 405HT: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.