Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interchar 963 Fire protection for I-beams, columns and hollow sections

Home | All models | Industrial coatings | Interchar 963

Interchar 963 Fire protection for I-beams, columns and hollow sections is supplied under the International Paint brand. It sits in the Industrial coatings range. It provides fire protection. Technical data list: DFT 350-750 µm (14-30 mil) · spreading rate 1 m²/L · solids 75% ± 2% · density 1.37 kg/L (11.4 lb/US gal). At 25 °C it is 30 min touch dry and 16 h hard dry.

Industrial coatingsFire protection

Basic data

Model
Interchar 963
Product type
Fire protection for I-beams, columns and hollow sections
Category
Industrial coatings
Volume solids
75% ± 2%
Theoretical spreading rate
1 m²/L
Recommended dry film thickness
350-750 µm (14-30 mil)
Density (specific gravity)
1.37 kg/L (11.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 16 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interchar 963 data sheet; other conditions are not listed.
Other parameters
For Interchar 963, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 1.000 L/m² for Interchar 963, excluding application losses. That is about 100.0 L per 100 m². At a wet film of 467–1000 µm, coverage is 0.73 m² per kg. All figures are calculated.

System and application

The substrate condition for Interchar 963 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Interchar 963 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interchar 963 Fire protection for I-beams, columns and hollow sections”; parameters not listed here are governed by that data sheet.

Enquiries on Interchar 963

  • System selection for Interchar 963: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interchar 963: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interchar 963: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.