Industrial coatings
Intercrete 4820 Waterproof coating infill
Home | All models | Industrial coatings | Intercrete 4820
Intercrete 4820 Waterproof coating infill is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 100%, density 1860 kg/m³ (116.114 lb/ft³). Drying at 20 °C: 5 h touch dry, 7 h hard dry.
Basic data
- Model
- Intercrete 4820
- Product type
- Waterproof coating infill
- Category
- Industrial coatings
- Volume solids
- 100%
- Density (specific gravity)
- 1860 kg/m³ (116.114 lb/ft³)
- Drying (20°C substrate temperature)
- Touch dry 5 h / Hard dry 7 h
- Drying conditions
- Values are taken from the 20 °C substrate-temperature row of the drying table in the Intercrete 4820 data sheet; other conditions are not listed.
- Other parameters
- For Intercrete 4820, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Without a listed rate, consumption for Intercrete 4820 is assessed from the TDS.
System and application
For Intercrete 4820, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intercrete 4820 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercrete 4820 Waterproof coating infill”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercrete 4820
- System selection for Intercrete 4820: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercrete 4820: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercrete 4820: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

