Intercrete 4842 is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 100% (wet film equals cured dry film) · DFT 1000 · density 1600 kg/m³(100 lb. Drying at 20 °C: 5 h touch dry, 24 h hard dry.
Basic data
- Model
- Intercrete 4842
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 100% (wet film equals cured dry film)
- Recommended dry film thickness
- 1000
- Density (specific gravity)
- 1600 kg/m³(100 lb
- Drying (20°C substrate temperature)
- Touch dry 5 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 20 °C substrate-temperature row of the drying table in the Intercrete 4842 data sheet; other conditions are not listed.
- Other parameters
- For Intercrete 4842, thinning and pack sizes are as stated in the technical data.
Consumption calculation
At a wet film of 1000 µm. All figures are calculated.
System and application
For Intercrete 4842, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
Consumption for Intercrete 4842 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercrete 4842 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercrete 4842
- System selection for Intercrete 4842: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercrete 4842: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercrete 4842: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

