Industrial coatings
Intercure 1039 Fast-drying epoxy primer
Home | All models | Industrial coatings | Intercure 1039
Intercure 1039 Fast-drying epoxy primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. Technical data list: DFT 75-100 µm (3-4 mil), spreading rate 8.93 m²/L, solids 67%, density 1.54 kg/L (12.9 lb/US gal). At 25 °C it is 20 min touch dry and 2 h hard dry.
Basic data
- Model
- Intercure 1039 (Fast-drying epoxy primer)
- Product type
- Fast-drying epoxy primer
- Category
- Industrial coatings
- Volume solids
- 67%
- Theoretical spreading rate
- 8.93 m²/L
- Recommended dry film thickness
- 75-100 µm (3-4 mil)
- Density (specific gravity)
- 1.54 kg/L (12.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 20 min / Hard dry 2 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 1039 (Fast-drying epoxy primer) data sheet; other conditions are not listed.
- Other parameters
- For Intercure 1039, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.112 L/m² for Intercure 1039, excluding application losses. That is about 11.2 L per 100 m². At a wet film of 112–149 µm, coverage is 5.80 m² per kg. All figures are calculated.
System and application
Intercure 1039 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intercure 1039 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 1039 Fast-drying epoxy primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercure 1039
- System selection for Intercure 1039: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercure 1039: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercure 1039: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

