Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intercure 200HS Fast-drying epoxy primer

Home | All models | Industrial coatings | Intercure 200HS

Intercure 200HS Fast-drying epoxy primer is supplied under the International Paint brand for primer use. It belongs to the Industrial coatings range. Published figures are: density 1.67 kg/L (13.9 lb/US gal) · solids 80% · spreading rate 5.33 m²/L · DFT 150-200 µm (6-8 mil). At 25 °C it is 2 h touch dry and 3 h hard dry.

Basic data

Model
Intercure 200HS (Fast-drying epoxy primer)
Product type
Fast-drying epoxy primer
Category
Industrial coatings
Volume solids
80%
Theoretical spreading rate
5.33 m²/L
Recommended dry film thickness
150-200 µm (6-8 mil)
Density (specific gravity)
1.67 kg/L (13.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 3 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 200HS (Fast-drying epoxy primer) data sheet; other conditions are not listed.
Other parameters
For Intercure 200HS, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.188 L/m² for Intercure 200HS, excluding application losses. That is about 18.8 L per 100 m². At a wet film of 188–250 µm, coverage is 3.19 m² per kg. These are theoretical values.

System and application

Intercure 200HS is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Intercure 200HS are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 200HS Fast-drying epoxy primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intercure 200HS

  • System selection for Intercure 200HS: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intercure 200HS: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intercure 200HS: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.