Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intercure 324 Fast-drying epoxy primer

Home | All models | Industrial coatings | Intercure 324

Intercure 324 Fast-drying epoxy primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. The data sheet gives: DFT 75-100 µm (3-4 mil), spreading rate 9.60 m²/L, solids 72%, density 1.62 kg/L (13.5 lb/US gal). At 25 °C it is 1.5 h touch dry and 3.5 h hard dry.

Basic data

Model
Intercure 324 (Fast-drying epoxy primer)
Product type
Fast-drying epoxy primer
Category
Industrial coatings
Volume solids
72%
Theoretical spreading rate
9.60 m²/L
Recommended dry film thickness
75-100 µm (3-4 mil)
Density (specific gravity)
1.62 kg/L (13.5 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 1.5 h / Hard dry 3.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 324 (Fast-drying epoxy primer) data sheet; other conditions are not listed.
Other parameters
For Intercure 324, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.104 L/m² for Intercure 324, excluding application losses. That is about 10.4 L per 100 m². At a wet film of 104–139 µm, coverage is 5.93 m² per kg. The values above are calculated.

System and application

Intercure 324 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Intercure 324 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 324 Fast-drying epoxy primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intercure 324 Fast-drying

  • System selection for Intercure 324 Fast-drying: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intercure 324 Fast-drying: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intercure 324 Fast-drying: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.