Industrial coatings
Intercure 384 High-build intermediate
Home | All models | Industrial coatings | Intercure 384
Intercure 384 High-build intermediate is an epoxy coating for intermediate use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 72% · density 1.79 kg/L (14.9 lb/US gal) · DFT 125-175 µm (5-7 mil) · spreading rate 5.80 m²/L. At 25 °C it is 2.5 h touch dry and 3.5 h hard dry.
Basic data
- Model
- Intercure 384
- Product type
- High-build intermediate
- Category
- Industrial coatings
- Volume solids
- 72%
- Theoretical spreading rate
- 5.80 m²/L
- Recommended dry film thickness
- 125-175 µm (5-7 mil)
- Density (specific gravity)
- 1.79 kg/L (14.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2.5 h / Hard dry 3.5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 384 data sheet; other conditions are not listed.
- Other parameters
- For Intercure 384, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.172 L/m² for Intercure 384, excluding application losses. That is about 17.2 L per 100 m². At a wet film of 174–243 µm, coverage is 3.24 m² per kg. The values above are calculated.
System and application
Intercure 384 is applied as an intermediate. The coats either side must meet the system requirements. Its mixing ratio and pot life are set out in the technical data.
Technical data for Intercure 384 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 384 High-build intermediate”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intercure 384 High-build
- System selection for Intercure 384 High-build: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intercure 384 High-build: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intercure 384 High-build: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

