Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intercure 420 Fast-drying epoxy coating

Home | All models | Industrial coatings | Intercure 420

Intercure 420 Fast-drying epoxy coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 70%, spreading rate 5.60 m²/L, DFT 100-150 µm (4-6 mil), density 1.63 kg/L (13.6 lb/US gal). Drying at 25 °C: 40 min touch dry, 2 h hard dry.

Basic data

Model
Intercure 420 (Fast-drying epoxy coating)
Product type
Fast-drying epoxy coating
Category
Industrial coatings
Volume solids
70%
Theoretical spreading rate
5.60 m²/L
Recommended dry film thickness
100-150 µm (4-6 mil)
Density (specific gravity)
1.63 kg/L (13.6 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 40 min / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intercure 420 (Fast-drying epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Intercure 420, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.179 L/m² for Intercure 420, excluding application losses. That is about 17.9 L per 100 m². At a wet film of 143–214 µm, coverage is 3.44 m² per kg. The values above are calculated.

System and application

For Intercure 420, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.

Consumption for Intercure 420 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intercure 420 Fast-drying epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intercure 420

  • System selection for Intercure 420: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intercure 420: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intercure 420: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.