Industrial coatings
Interdur 8800 Epoxy coating
Home | All models | Industrial coatings | Interdur 8800
Interdur 8800 Epoxy coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: DFT 75-200 µm (3-8 mil), density 1.63 kg/L (13.6 lb/US gal), solids 73%, spreading rate 5.84 m²/L. Drying at 25 °C: 2 h touch dry, 4 h hard dry.
Basic data
- Model
- Interdur 8800 (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Volume solids
- 73%
- Theoretical spreading rate
- 5.84 m²/L
- Recommended dry film thickness
- 75-200 µm (3-8 mil)
- Density (specific gravity)
- 1.63 kg/L (13.6 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8800 (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8800, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.171 L/m² for Interdur 8800, excluding application losses. That is about 17.1 L per 100 m². At a wet film of 103–274 µm, coverage is 3.58 m² per kg. The values above are calculated.
System and application
For Interdur 8800, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
TDS and SDS for Interdur 8800 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8800 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8800 Epoxy coating
- System selection for Interdur 8800 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8800 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8800 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

