Industrial coatings
Interdur 8803 Reinforced zinc-rich primer
Home | All models | Industrial coatings | Interdur 8803
Interdur 8803 Reinforced zinc-rich primer is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides zinc-rich priming. The data sheet gives: spreading rate 8.75 m²/L, solids 70% ± 2%, density 1.83 kg/L (15.3 lb/US gal). At 25 °C it is 5 h touch dry and 1 h hard dry.
Basic data
- Model
- Interdur 8803 (Reinforced zinc-rich primer)
- Product type
- Reinforced zinc-rich primer
- Category
- Industrial coatings
- Volume solids
- 70% ± 2%
- Theoretical spreading rate
- 8.75 m²/L
- Density (specific gravity)
- 1.83 kg/L (15.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 1 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8803 (Reinforced zinc-rich primer) data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8803, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.114 L/m² for Interdur 8803, excluding application losses. That is about 11.4 L per 100 m². Coverage is 4.78 m² per kg. The values above are calculated.
System and application
Interdur 8803 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Technical data for Interdur 8803 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8803 Reinforced zinc-rich primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8803
- System selection for Interdur 8803: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8803: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8803: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

