Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8807 Solvent-borne inorganic zinc silicate primer

Home | All models | Industrial coatings | Interdur 8807

Interdur 8807 Solvent-borne inorganic zinc silicate primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. It provides zinc-rich priming. Technical data list: solids 72% · density 2.62 kg/L (21.9 lb/US gal) · DFT 50-100 µm (2-4 mil) · spreading rate 9.60 m²/L. At 25 °C it is 5 h touch dry and 18 h hard dry.

Industrial coatingsPrimerZinc-rich primerInorganic zinc silicate

Basic data

Model
Interdur 8807
Product type
Solvent-borne inorganic zinc silicate primer
Category
Industrial coatings
Volume solids
72%
Theoretical spreading rate
9.60 m²/L
Recommended dry film thickness
50-100 µm (2-4 mil)
Density (specific gravity)
2.62 kg/L (21.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 5 h / Hard dry 18 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8807 data sheet; other conditions are not listed.
Other parameters
For Interdur 8807, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.104 L/m² for Interdur 8807, excluding application losses. That is about 10.4 L per 100 m². At a wet film of 69–139 µm, coverage is 3.66 m² per kg. All figures are calculated.

System and application

Interdur 8807 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Interdur 8807 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8807 Solvent-borne inorganic zinc silicate primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8807

  • System selection for Interdur 8807: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8807: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8807: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.