Industrial coatings
Interdur 8812 Temporary protective primer
Home | All models | Industrial coatings | Interdur 8812
Interdur 8812 Temporary protective primer is an inorganic zinc silicate coating for primer use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 28%, density 1.5 kg/L (12.5 lb/US gal), DFT 10-25 µm (0.4-1 mil), spreading rate 18.67 m²/L. At 25 °C it is 3 min touch dry and 5 min hard dry.
Basic data
- Model
- Interdur 8812
- Product type
- Temporary protective primer
- Category
- Industrial coatings
- Volume solids
- 28%
- Theoretical spreading rate
- 18.67 m²/L
- Recommended dry film thickness
- 10-25 µm (0.4-1 mil)
- Density (specific gravity)
- 1.5 kg/L (12.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 3 min / Hard dry 5 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8812 data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8812, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.054 L/m² for Interdur 8812, excluding application losses. That is about 5.4 L per 100 m². At a wet film of 36–89 µm, coverage is 12.45 m² per kg. The values above are calculated.
System and application
Interdur 8812 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Technical data for Interdur 8812 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8812 Temporary protective primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8812
- System selection for Interdur 8812: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8812: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8812: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

