Industrial coatings
Interdur 8840 High-build epoxy coating
Home | All models | Industrial coatings | Interdur 8840
Interdur 8840 High-build epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 80% · spreading rate 6.40 m²/L · DFT 100-200 µm (4-8 mil). Drying at 25 °C: 60 min touch dry, 5 h hard dry.
Basic data
- Model
- Interdur 8840 (High-build epoxy coating)
- Product type
- High-build epoxy coating
- Category
- Industrial coatings
- Volume solids
- 80%
- Theoretical spreading rate
- 6.40 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8840 (High-build epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Interdur 8840, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.156 L/m² for Interdur 8840, excluding application losses. That is about 15.6 L per 100 m². At a wet film of 125–250 µm. All figures are calculated.
System and application
For Interdur 8840, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.
TDS and SDS for Interdur 8840 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8840 High-build epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interdur 8840 High-build
- System selection for Interdur 8840 High-build: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interdur 8840 High-build: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interdur 8840 High-build: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

