Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8843SG

Home | All models | Industrial coatings | Interdur 8843SG

Interdur 8843SG is a polyurethane coating for primer and topcoat use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: DFT 150-200 µm (6-8 mil), spreading rate 2.80 m²/L, solids 56% ± 2%, density 1.41 kg/L (11.8 lb/US gal). At 25 °C it is 60 min touch dry and 5 h hard dry.

Industrial coatingsPrimerTopcoatPolyurethaneAcrylic

Basic data

Model
Interdur 8843SG
Product type
As stated in the technical data sheet
Category
Industrial coatings
Volume solids
56% ± 2%
Theoretical spreading rate
2.80 m²/L
Recommended dry film thickness
150-200 µm (6-8 mil)
Density (specific gravity)
1.41 kg/L (11.8 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8843SG data sheet; other conditions are not listed.
Other parameters
For Interdur 8843SG, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.357 L/m² for Interdur 8843SG, excluding application losses. That is about 35.7 L per 100 m². At a wet film of 268–357 µm, coverage is 1.99 m² per kg. The values above are calculated.

System and application

Interdur 8843SG is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Interdur 8843SG are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8843SG ”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8843SG

  • System selection for Interdur 8843SG: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8843SG: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8843SG: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.