Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8860 Polyurethane topcoat

Home | All models | Industrial coatings | Interdur 8860

Interdur 8860 Polyurethane topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: solids 57% ± 3% (depending on colour) · spreading rate 11.40 m²/L · DFT 50-75 µm (2-3 mil) · density 1.21 kg/L (10.1 lb/US gal). Drying at 25 °C: 90 min touch dry, 6 h hard dry.

Industrial coatingsTopcoatPolyurethane

Basic data

Model
Interdur 8860 (Polyurethane topcoat)
Product type
Polyurethane topcoat
Category
Industrial coatings
Volume solids
57% ± 3% (depending on colour)
Theoretical spreading rate
11.40 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.21 kg/L (10.1 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 90 min / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8860 (Polyurethane topcoat) data sheet; other conditions are not listed.
Other parameters
For Interdur 8860, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.088 L/m² for Interdur 8860, excluding application losses. That is about 8.8 L per 100 m². At a wet film of 88–132 µm, coverage is 9.42 m² per kg. The values above are calculated.

System and application

Interdur 8860 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are set out in the technical data.

Consumption for Interdur 8860 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8860 Polyurethane topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8860 Polyurethane

  • System selection for Interdur 8860 Polyurethane: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8860 Polyurethane: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8860 Polyurethane: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.