Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interdur 8862 Acrylic polysiloxane topcoat

Home | All models | Industrial coatings | Interdur 8862

Interdur 8862 Acrylic polysiloxane topcoat is supplied under the International Paint brand for topcoat use. It belongs to the Industrial coatings range. Published figures are: spreading rate 12.80 m²/L · solids 64% ± 2% · density 1.25 kg/L (10.4 lb/US gal) · DFT 50-75 µm (2-3 mil). Drying at 25 °C: 2.5 h touch dry, 6 h hard dry.

Industrial coatingsTopcoatAcrylic

Basic data

Model
Interdur 8862 (Acrylic polysiloxane topcoat)
Product type
Acrylic polysiloxane topcoat
Category
Industrial coatings
Volume solids
64% ± 2%
Theoretical spreading rate
12.80 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.25 kg/L (10.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2.5 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interdur 8862 (Acrylic polysiloxane topcoat) data sheet; other conditions are not listed.
Other parameters
For Interdur 8862, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.078 L/m² for Interdur 8862, excluding application losses. That is about 7.8 L per 100 m². At a wet film of 78–117 µm, coverage is 10.24 m² per kg. These are theoretical values.

System and application

Interdur 8862 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life follow that data sheet.

TDS and SDS for Interdur 8862 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interdur 8862 Acrylic polysiloxane topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interdur 8862

  • System selection for Interdur 8862: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interdur 8862: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interdur 8862: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.