Interfine 629HS is an acrylic coating for topcoat use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: density 1.55 kg/L (12.9 lb/US gal) · spreading rate 13 m²/L · solids 65% ± 3% (depending on colour). At 25 °C it is 60 min touch dry and 18 h hard dry.
Basic data
- Model
- Interfine 629HS
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 65% ± 3% (depending on colour)
- Theoretical spreading rate
- 13 m²/L
- Density (specific gravity)
- 1.55 kg/L (12.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 18 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 629HS data sheet; other conditions are not listed.
- Other parameters
- For Interfine 629HS, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.077 L/m² for Interfine 629HS, excluding application losses. That is about 7.7 L per 100 m². Coverage is 8.39 m² per kg. All figures are calculated.
System and application
Interfine 629HS as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Interfine 629HS can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 629HS ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interfine 629HS
- System selection for Interfine 629HS: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interfine 629HS: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interfine 629HS: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

