Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interfine 878 Acrylic polysiloxane topcoat

Home | All models | Industrial coatings | Interfine 878

Interfine 878 Acrylic polysiloxane topcoat is supplied under the International Paint brand for topcoat use. It sits in the Industrial coatings range. Technical data list: solids 72% · spreading rate 12 m²/L · DFT 50-75 µm (2-3 mil) · density 1.34 kg/L (11.2 lb/US gal). Drying at 25 °C: 3 h touch dry, 4 h hard dry.

Industrial coatingsTopcoatAcrylic

Basic data

Model
Interfine 878 (Acrylic polysiloxane topcoat)
Product type
Acrylic polysiloxane topcoat
Category
Industrial coatings
Volume solids
72%
Theoretical spreading rate
12 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.34 kg/L (11.2 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 878 (Acrylic polysiloxane topcoat) data sheet; other conditions are not listed.
Other parameters
For Interfine 878, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.083 L/m² for Interfine 878, excluding application losses. That is about 8.3 L per 100 m². At a wet film of 69–104 µm, coverage is 8.96 m² per kg. All figures are calculated.

System and application

Interfine 878 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Interfine 878 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 878 Acrylic polysiloxane topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interfine 878

  • System selection for Interfine 878: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interfine 878: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interfine 878: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.