Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interfine 979 Acrylic polysiloxane topcoat

Home | All models | Industrial coatings | Interfine 979

Interfine 979 Acrylic polysiloxane topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: DFT 100-150 µm (4-6 mil) · density 1.33 kg/L (11.1 lb/US gal) · solids 76% · spreading rate 6.08 m²/L. Drying at 25 °C: 3 h touch dry, 4 h hard dry.

Industrial coatingsTopcoatAcrylic

Basic data

Model
Interfine 979 (Acrylic polysiloxane topcoat)
Product type
Acrylic polysiloxane topcoat
Category
Industrial coatings
Volume solids
76%
Theoretical spreading rate
6.08 m²/L
Recommended dry film thickness
100-150 µm (4-6 mil)
Density (specific gravity)
1.33 kg/L (11.1 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 4 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interfine 979 (Acrylic polysiloxane topcoat) data sheet; other conditions are not listed.
Other parameters
For Interfine 979, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.164 L/m² for Interfine 979, excluding application losses. That is about 16.4 L per 100 m². At a wet film of 132–197 µm, coverage is 4.57 m² per kg. The values above are calculated.

System and application

Interfine 979 is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are set out in the technical data.

TDS and SDS for Interfine 979 are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interfine 979 Acrylic polysiloxane topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interfine 979

  • System selection for Interfine 979: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interfine 979: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interfine 979: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.