Industrial coatings
Intergard 251HS Epoxy zinc phosphate primer
Home | All models | Industrial coatings | Intergard 251HS
Intergard 251HS Epoxy zinc phosphate primer is supplied under the International Paint brand for primer use. It is catalogued under Industrial coatings. The data sheet gives: solids 75% ± 2% · spreading rate 10 m²/L · DFT 75-200 µm (3-8 mil) · density 1.59 kg/L (13.3 lb/US gal). Drying at 25 °C: 30 min touch dry, 2.25 h hard dry.
Basic data
- Model
- Intergard 251HS (Epoxy zinc phosphate primer)
- Product type
- Epoxy zinc phosphate primer
- Category
- Industrial coatings
- Volume solids
- 75% ± 2%
- Theoretical spreading rate
- 10 m²/L
- Recommended dry film thickness
- 75-200 µm (3-8 mil)
- Density (specific gravity)
- 1.59 kg/L (13.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 2.25 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 251HS (Epoxy zinc phosphate primer) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 251HS, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.100 L/m² for Intergard 251HS, excluding application losses. That is about 10.0 L per 100 m². At a wet film of 100–267 µm, coverage is 6.29 m² per kg. The values above are calculated.
System and application
Intergard 251HS as a primer, Surface preparation comes first. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intergard 251HS is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 251HS Epoxy zinc phosphate primer”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 251HS
- System selection for Intergard 251HS: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 251HS: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 251HS: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

