Industrial coatings
Intergard 263 Epoxy tie coat
Home | All models | Industrial coatings | Intergard 263
Intergard 263 Epoxy tie coat is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: density 1.4 kg/L (11.7 lb/US gal), solids 57% ± 2%, spreading rate 5.70 m²/L. Drying at 25 °C: 6 h touch dry, 16 h hard dry.
Basic data
- Model
- Intergard 263 (Epoxy tie coat)
- Product type
- Epoxy tie coat
- Category
- Industrial coatings
- Volume solids
- 57% ± 2%
- Theoretical spreading rate
- 5.70 m²/L
- Density (specific gravity)
- 1.4 kg/L (11.7 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 6 h / Hard dry 16 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 263 (Epoxy tie coat) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 263, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.175 L/m² for Intergard 263, excluding application losses. That is about 17.5 L per 100 m². Coverage is 4.07 m² per kg. The values above are calculated.
System and application
For Intergard 263, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Intergard 263 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 263 Epoxy tie coat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 263 Epoxy tie coat
- System selection for Intergard 263 Epoxy tie coat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 263 Epoxy tie coat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 263 Epoxy tie coat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

