Industrial coatings
Intergard 291 Epoxy coating
Home | All models | Industrial coatings | Intergard 291
Intergard 291 Epoxy coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: solids 53%, density 1.32 kg/L (11.0 lb/US gal), DFT 50-75 µm (2-3 mil), spreading rate 7.10 m²/L. At 25 °C it is 1 h touch dry and 4 h hard dry.
Basic data
- Model
- Intergard 291 (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Volume solids
- 53%
- Theoretical spreading rate
- 7.10 m²/L
- Recommended dry film thickness
- 50-75 µm (2-3 mil)
- Density (specific gravity)
- 1.32 kg/L (11.0 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 1 h / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 291 (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 291, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.141 L/m² for Intergard 291, excluding application losses. That is about 14.1 L per 100 m². At a wet film of 94–142 µm, coverage is 5.38 m² per kg. All figures are calculated.
System and application
The substrate condition for Intergard 291 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Technical data for Intergard 291 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 291 Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 291 Epoxy coating
- System selection for Intergard 291 Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 291 Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 291 Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

