Industrial coatings
Intergard 475HS Epoxy coating
Home | All models | Industrial coatings | Intergard 475HS
Intergard 475HS Epoxy coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: solids 80%, DFT 100-200 µm (4-8 mil), spreading rate 6.40 m²/L. Drying at 25 °C: 60 min touch dry, 5 h hard dry.
Basic data
- Model
- Intergard 475HS (Epoxy coating)
- Product type
- Epoxy coating
- Category
- Industrial coatings
- Volume solids
- 80%
- Theoretical spreading rate
- 6.40 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Drying (25°C substrate temperature)
- Touch dry 60 min / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 475HS (Epoxy coating) data sheet; other conditions are not listed.
- Other parameters
- For Intergard 475HS, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.156 L/m² for Intergard 475HS, excluding application losses. That is about 15.6 L per 100 m². At a wet film of 125–250 µm. These are theoretical values.
System and application
For Intergard 475HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Intergard 475HS is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 475HS Epoxy coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 475HS Epoxy coating
- System selection for Intergard 475HS Epoxy coating: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 475HS Epoxy coating: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 475HS Epoxy coating: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

