Intergard 563 is an epoxy coating for primer and intermediate use, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: spreading rate 6.10 m²/L · solids 61% · density 1.6 kg/L (13.4 lb/US gal). At 25 °C it is 2 h touch dry and 5 h hard dry.
Basic data
- Model
- Intergard 563
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 61%
- Theoretical spreading rate
- 6.10 m²/L
- Density (specific gravity)
- 1.6 kg/L (13.4 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 2 h / Hard dry 5 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 563 data sheet; other conditions are not listed.
- Other parameters
- For Intergard 563, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.164 L/m² for Intergard 563, excluding application losses. That is about 16.4 L per 100 m². Coverage is 3.81 m² per kg. The values above are calculated.
System and application
Intergard 563 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Intergard 563 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 563 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intergard 563
- System selection for Intergard 563: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intergard 563: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intergard 563: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

