Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings / Marine coatings

Intergard 7500 High-solids pure epoxy general-purpose primer

Home | All models | Industrial coatings | Intergard 7500

Intergard 7500 High-solids pure epoxy general-purpose primer is supplied under the International Paint brand for primer use. It sits in the Industrial coatings range. Technical data list: DFT 100-200 µm (4-8 mil) · spreading rate 6.40 m²/L · solids 80%. At 25 °C it is 60 min touch dry and 3 h hard dry. Intergard 7500 is used in both industrial and marine work.

Basic data

Model
Intergard 7500 (High-solids pure epoxy general-purpose primer)
Product type
High-solids pure epoxy general-purpose primer
Category
Industrial coatings / Marine coatings
Volume solids
80%
Theoretical spreading rate
6.40 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 3 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intergard 7500 (High-solids pure epoxy general-purpose primer) data sheet; other conditions are not listed.
Other parameters
For Intergard 7500, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.156 L/m² for Intergard 7500, excluding application losses. That is about 15.6 L per 100 m². At a wet film of 125–250 µm. All figures are calculated.

System and application

Intergard 7500 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are specified in the technical data sheet.

Technical data for Intergard 7500 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intergard 7500 High-solids pure epoxy general-purpose primer”; parameters not listed here are governed by that data sheet.

Enquiries on Intergard 7500

  • System selection for Intergard 7500: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intergard 7500: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intergard 7500: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.