Industrial coatings
Interlac 789 Single-coat system
Home | All models | Industrial coatings | Interlac 789
Interlac 789 Single-coat system is an alkyd coating for primer and topcoat use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 6.30 m²/L, density 1.57 kg/L (13.1 lb/US gal), solids 63% ± 3% (depending on colour). At 25 °C it is 80 min touch dry and 4 h hard dry.
Basic data
- Model
- Interlac 789
- Product type
- Single-coat system
- Category
- Industrial coatings
- Volume solids
- 63% ± 3% (depending on colour)
- Theoretical spreading rate
- 6.30 m²/L
- Density (specific gravity)
- 1.57 kg/L (13.1 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 80 min / Hard dry 4 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interlac 789 data sheet; other conditions are not listed.
- Other parameters
- For Interlac 789, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.159 L/m² for Interlac 789, excluding application losses. That is about 15.9 L per 100 m². Coverage is 4.01 m² per kg. These are theoretical values.
System and application
Interlac 789 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Interlac 789 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interlac 789 Single-coat system”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interlac 789 Single-coat
- System selection for Interlac 789 Single-coat: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interlac 789 Single-coat: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interlac 789 Single-coat: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

