Industrial coatings
Interseal 121 For rust bloom and paint overspray
Home | All models | Industrial coatings | Interseal 121
Interseal 121 For rust bloom and paint overspray is a water-borne coating, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 50%, spreading rate 2.50 m²/L, DFT 125-250 µm (5-10 mil), density 1.10 kg/L (9.2 lb/US gal). Drying at 25 °C: 20 min touch dry, 1 h hard dry.
Basic data
- Model
- Interseal 121
- Product type
- For rust bloom and paint overspray
- Category
- Industrial coatings
- Volume solids
- 50%
- Theoretical spreading rate
- 2.50 m²/L
- Recommended dry film thickness
- 125-250 µm (5-10 mil)
- Density (specific gravity)
- 1.10 kg/L (9.2 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 20 min / Hard dry 1 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interseal 121 data sheet; other conditions are not listed.
- Other parameters
- For Interseal 121, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.400 L/m² for Interseal 121, excluding application losses. That is about 40.0 L per 100 m². At a wet film of 250–500 µm, coverage is 2.27 m² per kg. The values above are calculated.
System and application
For Interseal 121, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
Consumption for Interseal 121 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 121 For rust bloom and paint overspray”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interseal 121
- System selection for Interseal 121: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interseal 121: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interseal 121: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

