Industrial coatings
Interseal 670HS Low Temperature For application over fully aged coatings
Home | All models | Industrial coatings | Interseal 670HS Low Temperature
Interseal 670HS Low Temperature For application over fully aged coatings is an epoxy coating, supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: DFT 100-250 µm (4-10 mil) · density 1.60 kg/L (13.4 lb/US gal) · solids 82% ± 3% (depending on colour) · spreading rate 6.56 m²/L. Drying at 10 °C: 5 h touch dry, 24 h hard dry.
Basic data
- Model
- Interseal 670HS Low Temperature
- Product type
- For application over fully aged coatings
- Category
- Industrial coatings
- Volume solids
- 82% ± 3% (depending on colour)
- Theoretical spreading rate
- 6.56 m²/L
- Recommended dry film thickness
- 100-250 µm (4-10 mil)
- Density (specific gravity)
- 1.60 kg/L (13.4 lb/US gal)
- Drying (10°C substrate temperature)
- Touch dry 5 h / Hard dry 24 h
- Drying conditions
- Values are taken from the 10 °C substrate-temperature row of the drying table in the Interseal 670HS Low Temperature data sheet; other conditions are not listed.
- Other parameters
- For Interseal 670HS Low Temperature, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.152 L/m² for Interseal 670HS Low Temperature, excluding application losses. That is about 15.2 L per 100 m². At a wet film of 122–305 µm, coverage is 4.10 m² per kg. The values above are calculated.
System and application
For Interseal 670HS Low Temperature, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are set out in the technical data.
TDS and SDS for Interseal 670HS Low Temperature are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interseal 670HS Low Temperature For application over fully aged coatings”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interseal 670HS Low
- System selection for Interseal 670HS Low: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interseal 670HS Low: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interseal 670HS Low: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

