Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intersheen 579 Sealer coat

Home | All models | Industrial coatings | Intersheen 579

Intersheen 579 Sealer coat is an acrylic coating for topcoat use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 40-50 µm (1.6-2 mil), spreading rate 8.80 m²/L, solids 35% ± 3%, density 1.105 kg/L (9.2 lb/US gal). At 25 °C it is 30 min touch dry and 8 h hard dry.

Industrial coatingsTopcoatAcrylic

Basic data

Model
Intersheen 579
Product type
Sealer coat
Category
Industrial coatings
Volume solids
35% ± 3%
Theoretical spreading rate
8.80 m²/L
Recommended dry film thickness
40-50 µm (1.6-2 mil)
Density (specific gravity)
1.105 kg/L (9.2 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 8 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intersheen 579 data sheet; other conditions are not listed.
Other parameters
For Intersheen 579, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.114 L/m² for Intersheen 579, excluding application losses. That is about 11.4 L per 100 m². At a wet film of 114–143 µm, coverage is 7.96 m² per kg. All figures are calculated.

System and application

Intersheen 579 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Intersheen 579 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intersheen 579 Sealer coat”; parameters not listed here are governed by that data sheet.

Enquiries on Intersheen 579 Sealer coat

  • System selection for Intersheen 579 Sealer coat: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intersheen 579 Sealer coat: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intersheen 579 Sealer coat: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.