Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy

Home | All models | Industrial coatings | Intershield 300

Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy is supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 100-200 µm (4-8 mil), spreading rate 4 m²/L, solids 60% ± 2%, density 1.23 kg/L (10.3 lb/US gal). At 25 °C it is 3 h touch dry and 6 h hard dry.

Basic data

Model
Intershield 300 (Abrasion-resistant aluminium-pigmented pure epoxy)
Product type
Abrasion-resistant aluminium-pigmented pure epoxy
Category
Industrial coatings
Volume solids
60% ± 2%
Theoretical spreading rate
4 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Density (specific gravity)
1.23 kg/L (10.3 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intershield 300 (Abrasion-resistant aluminium-pigmented pure epoxy) data sheet; other conditions are not listed.
Other parameters
For Intershield 300, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.250 L/m² for Intershield 300, excluding application losses. That is about 25.0 L per 100 m². At a wet film of 167–333 µm, coverage is 3.25 m² per kg. All figures are calculated.

System and application

The substrate condition for Intershield 300 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.

Selection and consumption for Intershield 300 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intershield 300 Abrasion-resistant aluminium-pigmented pure epoxy”; parameters not listed here are governed by that data sheet.

Enquiries on Intershield 300

  • System selection for Intershield 300: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intershield 300: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intershield 300: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.