Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interthane 870UHS Primer surface

Home | All models | Industrial coatings | Interthane 870UHS

Interthane 870UHS Primer surface is a polyurethane coating for topcoat use, supplied under the International Paint brand. It sits in the Industrial coatings range. Technical data list: DFT 75-125 µm (3-5 mil) · density 1.45 kg/L (12.1 lb/US gal) · solids 68% ± 3% (depending on colour) · spreading rate 5.40 m²/L. Drying at 25 °C: 1.5 h touch dry, 6 h hard dry.

Industrial coatingsTopcoatPolyurethane

Basic data

Model
Interthane 870UHS
Product type
Primer surface
Category
Industrial coatings
Volume solids
68% ± 3% (depending on colour)
Theoretical spreading rate
5.40 m²/L
Recommended dry film thickness
75-125 µm (3-5 mil)
Density (specific gravity)
1.45 kg/L (12.1 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 1.5 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 870UHS data sheet; other conditions are not listed.
Other parameters
For Interthane 870UHS, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.185 L/m² for Interthane 870UHS, excluding application losses. That is about 18.5 L per 100 m². At a wet film of 110–184 µm, coverage is 3.72 m² per kg. All figures are calculated.

System and application

Interthane 870UHS is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are specified in the technical data sheet.

TDS and SDS for Interthane 870UHS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 870UHS Primer surface”; parameters not listed here are governed by that data sheet.

Enquiries on Interthane 870UHS Primer

  • System selection for Interthane 870UHS Primer: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interthane 870UHS Primer: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interthane 870UHS Primer: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.