Interthane 976 is a polyurethane coating for topcoat use, supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: spreading rate 16 m²/L, DFT 15-30 µm (0.6-1.2 mil), density 0.97 kg/L (8.1 lb/US gal), solids 40%. At 25 °C it is 4 h touch dry and 14 h hard dry.
Basic data
- Model
- Interthane 976
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 40%
- Theoretical spreading rate
- 16 m²/L
- Recommended dry film thickness
- 15-30 µm (0.6-1.2 mil)
- Density (specific gravity)
- 0.97 kg/L (8.1 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 4 h / Hard dry 14 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 976 data sheet; other conditions are not listed.
- Other parameters
- For Interthane 976, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.062 L/m² for Interthane 976, excluding application losses. That is about 6.2 L per 100 m². At a wet film of 38–75 µm, coverage is 16.49 m² per kg. These are theoretical values.
System and application
Interthane 976 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life follow that data sheet.
Technical data for Interthane 976 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 976 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interthane 976
- System selection for Interthane 976: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interthane 976: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interthane 976: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

