Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interthane 990E Polyurethane topcoat

Home | All models | Industrial coatings | Interthane 990E

Interthane 990E Polyurethane topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: DFT 50-75 µm (2-3 mil), density 1.49 kg/L (12.4 lb/US gal), solids 70% ± 3%, spreading rate 14 m²/L. Drying at 25 °C: 2 h touch dry, 6 h hard dry.

Industrial coatingsTopcoatPolyurethane

Basic data

Model
Interthane 990E (Polyurethane topcoat)
Product type
Polyurethane topcoat
Category
Industrial coatings
Volume solids
70% ± 3%
Theoretical spreading rate
14 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
1.49 kg/L (12.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 2 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 990E (Polyurethane topcoat) data sheet; other conditions are not listed.
Other parameters
For Interthane 990E, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.071 L/m² for Interthane 990E, excluding application losses. That is about 7.1 L per 100 m². At a wet film of 71–107 µm, coverage is 9.40 m² per kg. The values above are calculated.

System and application

Interthane 990E is applied as a topcoat. The previous coat must be cured and clean. Its mixing ratio and pot life are set out in the technical data.

TDS and SDS for Interthane 990E are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 990E Polyurethane topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Interthane 990E Polyurethane

  • System selection for Interthane 990E Polyurethane: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interthane 990E Polyurethane: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interthane 990E Polyurethane: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.