Industrial coatings
Interthane 990SG Polyurethane topcoat
Home | All models | Industrial coatings | Interthane 990SG
Interthane 990SG Polyurethane topcoat is supplied under the International Paint brand for topcoat use. It is catalogued under Industrial coatings. The data sheet gives: DFT 50-75 µm (2-3 mil) · spreading rate 14.40 m²/L · solids 72% ± 3% depending on · density 1.47 kg/L (12.3 lb/US gal). At 25 °C it is 1.5 h touch dry and 6 h hard dry.
Basic data
- Model
- Interthane 990SG (Polyurethane topcoat)
- Product type
- Polyurethane topcoat
- Category
- Industrial coatings
- Volume solids
- 72% ± 3% depending on
- Theoretical spreading rate
- 14.40 m²/L
- Recommended dry film thickness
- 50-75 µm (2-3 mil)
- Density (specific gravity)
- 1.47 kg/L (12.3 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 1.5 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Interthane 990SG (Polyurethane topcoat) data sheet; other conditions are not listed.
- Other parameters
- For Interthane 990SG, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.069 L/m² for Interthane 990SG, excluding application losses. That is about 6.9 L per 100 m². At a wet film of 69–104 µm, coverage is 9.80 m² per kg. The values above are calculated.
System and application
Interthane 990SG as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Interthane 990SG are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interthane 990SG Polyurethane topcoat”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Interthane 990SG Polyurethane
- System selection for Interthane 990SG Polyurethane: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Interthane 990SG Polyurethane: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Interthane 990SG Polyurethane: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

