Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intertherm 181 High-temperature topcoat

Home | All models | Industrial coatings | Intertherm 181

Intertherm 181 High-temperature topcoat is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides heat resistance. The data sheet gives: solids 69% · density 1.65 kg/L (13.8 lb/US gal) · DFT 100-125 µm (4-5 mil) · spreading rate 5.50 m²/L. At 25 °C it is 15 min touch dry and 1.5 h hard dry.

Industrial coatingsTopcoatHeat-resistant

Basic data

Model
Intertherm 181
Product type
High-temperature topcoat
Category
Industrial coatings
Volume solids
69%
Theoretical spreading rate
5.50 m²/L
Recommended dry film thickness
100-125 µm (4-5 mil)
Density (specific gravity)
1.65 kg/L (13.8 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 15 min / Hard dry 1.5 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 181 data sheet; other conditions are not listed.
Other parameters
For Intertherm 181, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.182 L/m² for Intertherm 181, excluding application losses. That is about 18.2 L per 100 m². At a wet film of 145–181 µm, coverage is 3.33 m² per kg. The values above are calculated.

System and application

Intertherm 181 as a topcoat, The previous coat must already be cured. Its mixing ratio and pot life are set out in the technical data.

Technical data for Intertherm 181 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 181 High-temperature topcoat”; parameters not listed here are governed by that data sheet.

Enquiries on Intertherm 181

  • System selection for Intertherm 181: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intertherm 181: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intertherm 181: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.