Intertherm 2205 is an epoxy coating, supplied under the International Paint brand. It belongs to the Industrial coatings range. Its function is heat resistance. Published figures are: density 1.34 kg/L (11.2 lb/US gal) · DFT 100-200 µm (4-8 mil) · spreading rate 8.50 m²/L · solids 85%. Drying at 60 °C: 30 min touch dry, 60 min hard dry.
Basic data
- Model
- Intertherm 2205
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 85%
- Theoretical spreading rate
- 8.50 m²/L
- Recommended dry film thickness
- 100-200 µm (4-8 mil)
- Density (specific gravity)
- 1.34 kg/L (11.2 lb/US gal)
- Drying (60°C substrate temperature)
- Touch dry 30 min / Hard dry 60 min
- Drying conditions
- Values are taken from the 60 °C substrate-temperature row of the drying table in the Intertherm 2205 data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 2205, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.118 L/m² for Intertherm 2205, excluding application losses. That is about 11.8 L per 100 m². At a wet film of 118–235 µm, coverage is 6.34 m² per kg. These are theoretical values.
System and application
For Intertherm 2205, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
Consumption for Intertherm 2205 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 2205 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 2205
- System selection for Intertherm 2205: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 2205: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 2205: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

