Industrial coatings
Intertherm 228HS Epoxy-phenolic high-temperature coating
Home | All models | Industrial coatings | Intertherm 228HS
Intertherm 228HS Epoxy-phenolic high-temperature coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Its function is heat resistance. Published figures are: spreading rate 4.67 m²/L, solids 70%, density 1.86 kg/L (15.5 lb/US gal), DFT 100-150 µm (4-6 mil). Drying at 25 °C: 5 h touch dry, 8 h hard dry.
Basic data
- Model
- Intertherm 228HS (Epoxy-phenolic high-temperature coating)
- Product type
- Epoxy-phenolic high-temperature coating
- Category
- Industrial coatings
- Volume solids
- 70%
- Theoretical spreading rate
- 4.67 m²/L
- Recommended dry film thickness
- 100-150 µm (4-6 mil)
- Density (specific gravity)
- 1.86 kg/L (15.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 5 h / Hard dry 8 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 228HS (Epoxy-phenolic high-temperature coating) data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 228HS, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
Coverage works out at 0.214 L/m² for Intertherm 228HS, excluding application losses. That is about 21.4 L per 100 m². At a wet film of 143–214 µm, coverage is 2.51 m² per kg. These are theoretical values.
System and application
For Intertherm 228HS, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life follow that data sheet.
TDS and SDS for Intertherm 228HS are available on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 228HS Epoxy-phenolic high-temperature coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 228HS
- System selection for Intertherm 228HS: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 228HS: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 228HS: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

