Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intertherm 3070 Phenolic epoxy coating

Home | All models | Industrial coatings | Intertherm 3070

Intertherm 3070 Phenolic epoxy coating is supplied under the International Paint brand. It is catalogued under Industrial coatings. The data sheet gives: solids 70% ± 2%, density 1.67 kg/L (13.9 lb/US gal), DFT 100-175 µm (4-7 mil), spreading rate 5.80 m²/L. At 25 °C it is 3 h touch dry and 6 h hard dry.

Industrial coatingsEpoxyPhenolic

Basic data

Model
Intertherm 3070 (Phenolic epoxy coating)
Product type
Phenolic epoxy coating
Category
Industrial coatings
Volume solids
70% ± 2%
Theoretical spreading rate
5.80 m²/L
Recommended dry film thickness
100-175 µm (4-7 mil)
Density (specific gravity)
1.67 kg/L (13.9 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 3 h / Hard dry 6 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 3070 (Phenolic epoxy coating) data sheet; other conditions are not listed.
Other parameters
For Intertherm 3070, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.172 L/m² for Intertherm 3070, excluding application losses. That is about 17.2 L per 100 m². At a wet film of 143–250 µm, coverage is 3.47 m² per kg. The values above are calculated.

System and application

The substrate condition for Intertherm 3070 has to be checked before application. Its mixing ratio and pot life are set out in the technical data.

Technical data for Intertherm 3070 can be supplied on request. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 3070 Phenolic epoxy coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intertherm 3070 Phenolic

  • System selection for Intertherm 3070 Phenolic: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intertherm 3070 Phenolic: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intertherm 3070 Phenolic: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.