Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intertherm 50 Silicone high-temperature coating

Home | All models | Industrial coatings | Intertherm 50

Intertherm 50 Silicone high-temperature coating is supplied under the International Paint brand. It sits in the Industrial coatings range. Its function is heat resistance. Technical data list: solids 45% · spreading rate 18 m²/L · density 1.13 kg/L (9.4 lb/US gal). Drying at 25 °C: 30 min touch dry, 2 h hard dry.

Industrial coatingsHeat-resistant

Basic data

Model
Intertherm 50 (Silicone high-temperature coating)
Product type
Silicone high-temperature coating
Category
Industrial coatings
Volume solids
45%
Theoretical spreading rate
18 m²/L
Density (specific gravity)
1.13 kg/L (9.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 30 min / Hard dry 2 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 50 (Silicone high-temperature coating) data sheet; other conditions are not listed.
Other parameters
For Intertherm 50, thinning and pack sizes are as stated in the technical data.

Consumption calculation

Theoretical consumption is 0.056 L/m² for Intertherm 50, excluding application losses. That is about 5.6 L per 100 m². Coverage is 15.93 m² per kg. All figures are calculated.

System and application

For Intertherm 50, the surface preparation grade has to be confirmed before application. Its mixing ratio and pot life are specified in the technical data sheet.

Consumption for Intertherm 50 is assessed from the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 50 Silicone high-temperature coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intertherm 50

  • System selection for Intertherm 50: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intertherm 50: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intertherm 50: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.