Industrial coatings
Intertherm 7050 High-performance epoxy composite insulation coating
Home | All models | Industrial coatings | Intertherm 7050
Intertherm 7050 High-performance epoxy composite insulation coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. Published figures are: density 0.57 g/cm3 note:final, solids 100%. At 25 °C it is 1 h touch dry and 6 h hard dry.
Basic data
- Model
- Intertherm 7050
- Product type
- High-performance epoxy composite insulation coating
- Category
- Industrial coatings
- Volume solids
- 100%
- Density (specific gravity)
- 0.57 g/cm3 note:final
- Drying (25°C substrate temperature)
- Touch dry 1 h / Hard dry 6 h
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 7050 data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 7050, mixing, thinning and pack sizes are given in the technical data sheet.
Consumption calculation
The TDS gives no spreading rate for Intertherm 7050; consumption is taken from it.
System and application
The substrate condition for Intertherm 7050 has to be checked before application. Its mixing ratio and pot life follow that data sheet.
Selection and consumption for Intertherm 7050 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 7050 High-performance epoxy composite insulation coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 7050
- System selection for Intertherm 7050: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 7050: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 7050: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

