Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Intertherm 751CSA Heat-resistant cold-spray aluminium coating

Home | All models | Industrial coatings | Intertherm 751CSA

Intertherm 751CSA Heat-resistant cold-spray aluminium coating is supplied under the International Paint brand. It belongs to the Industrial coatings range. It provides heat resistance. Published figures are: density 1 .28 kg/L (10.7 lb/US gal), solids 61%, spreading rate 3.49 m²/L, DFT 100-200 µm (4-8 mil). At 25 °C it is 60 min touch dry and 10 h hard dry.

Industrial coatingsHeat-resistant

Basic data

Model
Intertherm 751CSA (Heat-resistant cold-spray aluminium coating)
Product type
Heat-resistant cold-spray aluminium coating
Category
Industrial coatings
Volume solids
61%
Theoretical spreading rate
3.49 m²/L
Recommended dry film thickness
100-200 µm (4-8 mil)
Density (specific gravity)
1 .28 kg/L (10.7 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 60 min / Hard dry 10 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 751CSA (Heat-resistant cold-spray aluminium coating) data sheet; other conditions are not listed.
Other parameters
For Intertherm 751CSA, mixing, thinning and pack sizes are given in the technical data sheet.

Consumption calculation

Coverage works out at 0.287 L/m² for Intertherm 751CSA, excluding application losses. That is about 28.7 L per 100 m². At a wet film of 164–328 µm, coverage is 3.49 m² per kg. These are theoretical values.

System and application

The substrate condition for Intertherm 751CSA has to be checked before application. Its mixing ratio and pot life follow that data sheet.

Selection and consumption for Intertherm 751CSA are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 751CSA Heat-resistant cold-spray aluminium coating”; parameters not listed here are governed by that data sheet.

Enquiries on Intertherm 751CSA

  • System selection for Intertherm 751CSA: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Intertherm 751CSA: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Intertherm 751CSA: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.