Intertherm 79 is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides heat resistance. The data sheet gives: spreading rate 8.30 m²/L · solids 50% · density 1.50 kg/L (12.5 lb/US gal). At 25 °C it is 15 min touch dry and 25 min hard dry.
Basic data
- Model
- Intertherm 79
- Product type
- As stated in the technical data sheet
- Category
- Industrial coatings
- Volume solids
- 50%
- Theoretical spreading rate
- 8.30 m²/L
- Density (specific gravity)
- 1.50 kg/L (12.5 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 15 min / Hard dry 25 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 79 data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 79, the technical data sheet covers mixing, thinning and pack sizes.
Consumption calculation
Consumption is 0.120 L/m² for Intertherm 79, excluding application losses. That is about 12.0 L per 100 m². Coverage is 5.53 m² per kg. The values above are calculated.
System and application
Intertherm 79 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.
Selection and consumption for Intertherm 79 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 79 ”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 79
- System selection for Intertherm 79: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 79: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 79: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

