Industrial coatings
Intertherm 875 Silicone acrylic heat-resistant coating
Home | All models | Industrial coatings | Intertherm 875
Intertherm 875 Silicone acrylic heat-resistant coating is supplied under the International Paint brand. It sits in the Industrial coatings range. It provides heat resistance. Technical data list: DFT 25-40 µm (1-1.6 mil), spreading rate 15.60 m²/L, solids 39%, density 1.07 kg/L (8.9 lb/US gal). At 25 °C it is 30 min touch dry and 90 min hard dry.
Basic data
- Model
- Intertherm 875 (Silicone acrylic heat-resistant coating)
- Product type
- Silicone acrylic heat-resistant coating
- Category
- Industrial coatings
- Volume solids
- 39%
- Theoretical spreading rate
- 15.60 m²/L
- Recommended dry film thickness
- 25-40 µm (1-1.6 mil)
- Density (specific gravity)
- 1.07 kg/L (8.9 lb/US gal)
- Drying (25°C substrate temperature)
- Touch dry 30 min / Hard dry 90 min
- Drying conditions
- Values are taken from the 25 °C substrate-temperature row of the drying table in the Intertherm 875 (Silicone acrylic heat-resistant coating) data sheet; other conditions are not listed.
- Other parameters
- For Intertherm 875, thinning and pack sizes are as stated in the technical data.
Consumption calculation
Theoretical consumption is 0.064 L/m² for Intertherm 875, excluding application losses. That is about 6.4 L per 100 m². At a wet film of 64–103 µm, coverage is 14.58 m² per kg. All figures are calculated.
System and application
The substrate condition for Intertherm 875 has to be checked before application. Its mixing ratio and pot life are specified in the technical data sheet.
Selection and consumption for Intertherm 875 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Intertherm 875 Silicone acrylic heat-resistant coating”; parameters not listed here are governed by that data sheet.
Other models in this category
Enquiries on Intertherm 875
- System selection for Intertherm 875: structure type, service environment and area are sufficient for a coating system to be proposed.
- Quantity and price for Intertherm 875: take-off from area and design dry film thickness, quoted against quantity.
- Documents for Intertherm 875: TDS and SDS on request.
Chat on WhatsApp | max@rich-tech.net
Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.

