Skip to main content
International PaintChina-based supplier providing export of International Paint coatings produced in ChinaChina-based supplier | International Paint export AkzoNobel

Industrial coatings

Interzinc 22 Inorganic zinc-rich primer

Home | All models | Industrial coatings | Interzinc 22

Interzinc 22 Inorganic zinc-rich primer is supplied under the International Paint brand. It is catalogued under Industrial coatings. It provides zinc-rich priming. The data sheet gives: DFT 50-75 µm (2-3 mil), spreading rate 8.40 m²/L, solids 63%, density 2.44 kg/L (20.4 lb/US gal). At 25 °C it is 10 min touch dry and 1 h hard dry.

Industrial coatingsPrimerZinc-rich primer

Basic data

Model
Interzinc 22 (Inorganic zinc-rich primer)
Product type
Inorganic zinc-rich primer
Category
Industrial coatings
Volume solids
63%
Theoretical spreading rate
8.40 m²/L
Recommended dry film thickness
50-75 µm (2-3 mil)
Density (specific gravity)
2.44 kg/L (20.4 lb/US gal)
Drying (25°C substrate temperature)
Touch dry 10 min / Hard dry 1 h
Drying conditions
Values are taken from the 25 °C substrate-temperature row of the drying table in the Interzinc 22 (Inorganic zinc-rich primer) data sheet; other conditions are not listed.
Other parameters
For Interzinc 22, the technical data sheet covers mixing, thinning and pack sizes.

Consumption calculation

Consumption is 0.119 L/m² for Interzinc 22, excluding application losses. That is about 11.9 L per 100 m². At a wet film of 79–119 µm, coverage is 3.44 m² per kg. The values above are calculated.

System and application

Interzinc 22 is applied as a primer. Surface preparation is the critical step. Its mixing ratio and pot life are set out in the technical data.

Selection and consumption for Interzinc 22 are checked against the service conditions. Data source: AkzoNobel International Paint technical data sheet (TDS) “Interzinc 22 Inorganic zinc-rich primer”; parameters not listed here are governed by that data sheet.

Enquiries on Interzinc 22

  • System selection for Interzinc 22: structure type, service environment and area are sufficient for a coating system to be proposed.
  • Quantity and price for Interzinc 22: take-off from area and design dry film thickness, quoted against quantity.
  • Documents for Interzinc 22: TDS and SDS on request.

Contact channels

Chat on WhatsApp | max@rich-tech.net

WeChat QR code — scan to add us on WeChat

Scan to add us on WeChat;
TDS and SDS, and material
take-off, on request.